User Guide-Venus

Specification

Venus Portable Wine Chiller

Description

Dimension

164(W) x 245(L) x 232(H) mm

Weight

2.7 KG / 5.95 lbs

Including a 500g/ 1.1 lbs rechargeable battery

Chamber

115mm

Compatible with large diameter of Champagne

Battery

18V, 5,500mAh, 99Wh

Life time 2.5~4 hours

Voltage

100~240V, 50~ 60Hz (input)

21.2V, 2.7A (output)

Full-voltage

Charging

* Please insert the battery into the device (power should be switched off)  and charge it before the initial use or after it has been in prolonged storage.
* To extend the life of the battery, it's suggested to charge it after each use.

① Offline charging :

Insert the battery pack into the charging dock, and wait until the indicator light turns from red to green, indicating that the battery is fully charged.

 
 

② Plug-in charging:

Make sure the power of the main unit has been switched off, insert the battery into the wine chiller, and plug the charging cable directly into the charging port.

How to Use


Plug the charging cord into the charging port or use battery to activate VIVANT Portable Wine Chiller.
Get wine from your  wine cellar or refrigerator
Put the wine bottle into the VIVANT
Portable Wine Chiller
Long press the power button for 3 seconds to activate the VIVANT Portable Wine Chiller
After setting up your desired temperature, you may enjoy your wine, as the temperature will be maintained precisely by the VIVANT Portable Wine Chiller

Indicators

Icon

Description

Power button;long press to turn on/off the system.

Press the button repeatedly to increase the temperature until you reach the desired temperature on display. The screen will flash for three seconds to indicate that the setting is completed. Pressing the + and - buttons at the same time can switch between Celsius and Fahrenheit.
minus

Press the button repeatedly to decrease the temperature until you reach the desired temperature on display. The screen will flash for three seconds to indicate that the setting is completed. Pressing the + and - buttons at the same time can switch between Celsius and Fahrenheit.

Temperature display (acceptable temperature range for setting): When it is constantly on, it shows the current temperature; when it is flashing, it indicates that it has entered the setting mode and
the temperature can be adjusted. After the temperature is set, the display screen will return to being constantly on (displaying the current temperature)."

Error Messages:
E0:Battery abnormal, or low power. Replace fully charged battery or use the AC cord to activate the machine.
E3:Fan not working. Please contact VIVANT.
E4:Temperature sensor abnormal. Please contact VIVANT .

Battery power display (upward represents for power increasing; downward represents for power decreasing)

Degree(s) Celsius

Degree(s) Fahrenheit

Notices

  • Please insert the battery into the device (power should be switched off)  and charge it before the initial use or after it has been in prolonged storage.
  • To ensure the performance of heat dissipation, it's important to keep both sides of the chiller clear and allow for at least 30cm of space around it.
  • To extend the life of the battery, it's suggested to charge it after each use.
  • It is recommended to place the wine bottle as close as possible to the cooling plate of the machine.
  • The battery is custom made for VIVANT products only, do not use non-product chargers to charge, and disassembling the battery is strictly prohibited.
  • VIVANT portable wine chiller with temperature control contains electronic components, please do not place it in high-temperature environments such as dishwashers, microwaves, or ovens.
  • This device should only be used by individuals with sufficient knowledge and experience or under the supervision of a responsible person.
  • Children should be supervised to ensure that they do not play with the device.

How to Clean

When cleaning the Portable Wine Chiller, make sure to disconnect the power source and remove the battery to avoid any accidents.
Cleaning guidelines
1. Wipe with a soft fiber cloth to remove dust and dirt. If there are stubborn stains, use a mild cleaner such as dish soap or soapy water.
2. Avoid using alcohol, ammonia or bleach as these may cause surface discoloration.
3. For gaps and grooves, you can use a soft brush or cotton swab to clean.
Daily use precautions
1. Please pour out the water in the water tray immediately after use and place
it in a well-ventilated environment.
2. If traces of mold appear on the water tray without following the above
precautions, you can soak it in baking soda water or detergents to remove it.


▲Empty the water tray after use. Steps 1~2 to unload the tray.
back