Indicators for Titan

Indicators	LED Indicatior / Quick Guide
Power On	Press and hold the control knob for 2 seconds to turn on the device. The VIVANT logo screen will be displayed with a startup sound.
Welcome	The welcome screen will be shown briefly, followed by the startup screen.
Display Screen	On the display screen, the bottom-left indicates the set temperature. The top-left shows the temperature detected by the IR sensor. The bottom-right displays the set decanting time, while the top-right indicates the operating time / elapsed decanting time. The battery level is shown in the upper-left area of the display.
Set up mode	Short press the control knob to enter set up mode. The active setting will flash to indicate that it can be adjusted. Each short press advances to the next setting item. Rotate the knob clockwise or counterclockwise to make adjustments. After the fourth short press, the decanting process will begin.
Setting Temperature	In set up mode, rotate the knob clockwise to increase the temperature, or counter-clockwise to decrease the temperature. • The temperature can be set from 8°C–20°C (46°F–68°F).
Switch ℃/°F	Short press the button again to switch between Celsius and Fahrenheit temperature display. Rotate clockwise to select ℃, rotate counterclockwise to select °F.
Setting Time	Rotate the control knob to adjust the desired decanting duration. For safety protection, the TITAN will automatically power off 8 hours after the last operation. For extended decanting sessions, the device may be reactivated as needed to maintain temperature control while the device be attended during operation.
Target Reached	After confirming the decanting time, the decanting process will begin. Once the target temperature and decanting time are reached, an audio alert will sound. The audio alert can be disabled through the VIVANT Wine App.
Power Off	Press and hold the knob for 2 seconds until the logo screen appears. The device will power off after 5 seconds. * After the display turns off, the shutdown process may still be in progress. Please wait briefly until the device has completely stopped operating before removing the battery or disconnecting the power cable.