Indicators for Titan

Indicators 

LED Indicatior / Quick Guide

Long press the knob to power on/off the systemPower On
Press and hold the knob for 2 seconds to turn on the device, the boot indicator sound will sound and the logo screen will be displayed for 3 seconds, and then the welcome screen will be displayed for 3 seconds.
Press and hold the button for 2  seconds to turn on the device. After approximately 3 seconds, you will hear a startup sound and  the logo screen will be displayed for 3 seconds.
Welcome

Welcome

Then the welcome screen will be shown for 3 seconds, and then the startup screen will appear.
Power On
Startup  Screen
  On the power-on screen, the bottom-left indicates the set temperature, the top-left shows the current ambient temperature, the numbers on the right represent the running time since startup, the top-left corner displays the battery status, and the top-right corner indicates the Bluetooth and sound effects.
Set up
Set up
Short press the knob, the screen flashes by sections

Short press the rotary button, the screen will flash, and continue to short press to select the desired setting item.

Setting Temperature
Setting Temperature

Short press the rotary button once to start adjusting. Rotate the knob  clockwise or counterclockwise to set up the desired temperature.

Short press the rotary button once to start adjusting.


 ↷Clockwise→ increase the temperature
 ↶Counterclockwise→ decrease  the temperature

Switch ℃/°F
Switch ℃/°F
Short press the button again to switch between Celsius and Fahrenheit temperature display. Rotate clockwise to select ℃, rotate counterclockwise to select °F.
Startup Screen
 Set up Mode
Short press the button twice to return to the initial set up mode.
*Please note that the setting mode ends automatically after 8 seconds of inactivity.

Reaching Target Temperature

Reaching Target Temperature

Once the target temperature is reached, the display will show "hold," and the border surrounding the temperature indication will turn blue.
Long press the knob to power on/off the systemPower Off
Press and hold the knob for 2 seconds to turn on the device, the boot indicator sound will sound and the logo screen will be displayed for 3 seconds, and then the welcome screen will be displayed for 3 seconds.

Press and hold the knob for 2 seconds till display the logo screen, and it will shut down after 5 seconds.


Error Messages:
ERRORE 1: Batteria anomala o malfunzionante   ERROR 1 :Battery Abnormal or Malfunctioning.
ERRORE 2: Sensore a infrarossi anomali o malfunzionante   ERROR 2 :IR Sensor Abnormal or Malfunctioning
ERRORE 3: Ventola anomala o manfunzionante   ERROR 3 :Fan Abnormal or Malfunctioning

* Please scan the QR code to contact support

FCC WARNING

This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may causeundesired operation.Any changes or modifications not expressly approved by the party responsible for compliancecould void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try tocorrect the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.

-- Consult the dealer or an experienced radio / TV technician for help.To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installedand operated with minimum 20 cm distance between the radiator and your body: Use only thesupplied antenna.